清除 Cognex VisionPro V8.3 的试用期限

目录 Content
[hide]

Cognex VisionPro V8.3 提供了紧急许可机制,可以使用3天/次 * 5次,超过期限就不能再使用了。

em-vpromax

一、版本

VisionPro 8.3 64-bit

There is 1 Cognex board installed.

Board 0 - Cognex Software License v2
  No Serial Number information available.
  Software licenses: 
        Vx3DLocate                      (3 days remaining)
        Vx3DRangeTools                  (3 days remaining)
        VxBarCode                       (3 days remaining)
        VxBlob                          (3 days remaining)
        VxCalib                         (3 days remaining)
        VxCaliper                       (3 days remaining)
        VxCamMax                        (3 days remaining)
        VxCnlSearch                     (3 days remaining)
        VxColor                         (3 days remaining)
        VxDataAnalysis                  (3 days remaining)
        VxDimensioning                  (3 days remaining)
        VxDisplay                       (3 days remaining)
        VxGMorph                        (3 days remaining)
        VxModelMaker                    (3 days remaining)
        VxMultithread                   (3 days remaining)
        VxOCR                           (3 days remaining)
        VxOCV                           (3 days remaining)
        VxOCVMax                        (3 days remaining)
        VxPatFlex                       (3 days remaining)
        VxPatInspect                    (3 days remaining)
        VxPatMax                        (3 days remaining)
        VxPatQuick                      (3 days remaining)
        VxReader                        (3 days remaining)
        VxSWAcquisition                 (3 days remaining)
        VxSWOptions                     (3 days remaining)
        VxSearchMax                     (3 days remaining)
        VxSymbol                        (3 days remaining)
        VxSymbolVerifyAdvanced          (3 days remaining)
        VxSymbolVerifyBasic             (3 days remaining)
        VxSynthPatMax                   (3 days remaining)
        VxToolGroup                     (3 days remaining)
        VxToolGroupEdit                 (3 days remaining)
        VxValidation                    (3 days remaining)

Security Service Configuration
  detected: Cognex Software Licensing Service
  version:  2.2.8
  required version:  2.2.8
  meets version requirement:  yes
  supports: Cognex Software License v2
            

二、原理

V8.3 使用的 FlexNet 授权机制,软件会把试用许可信息写入注册表以及磁盘扇区32,使用工具清除即可。

三、工具

1.Trial-Reset 4.0

此工具可以检测注册表以及磁盘扇区。

下载:http://download.csdn.net/detail/robotics5/9577735

如果是在虚拟机里使用,会检测不到磁盘扇区的数据,所以还需要另一个软件 DiskGenius。

2.DiskGenius

使用“清理保留扇区”功能,即可把扇区32的内容清除。

四、其他

然后就可以无限制地尽情试用了,商业使用请支持正版。

Leave a Reply

Your email address will not be published. Required fields are marked *